Red Bull

Coke/Engine Cover - Circuit specific, Cooling Range. Bodywork panel forming a suspension aperture and cooling exit has been reduced in exit size. Given the average speed of Jeddah as well as the absence of a series of low speed corners, the cooling exit area can be redue🎃d whils✅t keeping the PU within its operational limits.

Rear Wing - Circuit specific, Drag Range. A lower camber rear wing assembly to suit the lift/drag requirements.𓆏 At a given speed, the wing has less aerodynaamic load and therefore drag than the design used in Bahrain, hence the p൲hrase lower drag rear wing. Ultimately the PU will balance out against the drag, albeit at a higher air speed.

Beam Wing - Circuit specific, Drag Range A reduced camber beam or lower rear wing Again aime✤d at a lower drag level for a given air.

Mercedes

Rear Corner - Performance, Local Load. Lower deflector rotation. Reduced loading on the forward element,🔜 which leads to ไimproved robustness of the lower deflector throughout the ride height range.

Ferrari

Rear Wing - Circuit specific, Drag Range Lower downforce top rear wing design. Fully carried over from 2023 car and specific to lower downforce tracks, this update features depowered Top Rear Wing profiles in order to adapt to Jeddah circuit la🍌yout peculiarities and efficiency requirements.

Beam Wing - Circuit spꦏecific, Drag Range Depowered lower beam. 2 variations will be made available, including single element arrangement As for the top Rear Wing update, these🐻 modulations are targetting the optimum aerodynamic efficiency around Jeddah circuit layout peculiarities.

McLaren

Rear Wing Circuit specific, D♈rag Range. Lower Drag Rear Wing Assembly. New lower Drag Rear Wing Assembly, with an offloaded Mainplane and Flap, resulting in an efficient reduction of Downforce and Drag. 

Beam Wing - Circuit specific, Drag Range New upper and lower Beamwing Element. This new Beamwing Geometry features a new upper and lower element, which, as a result of the interaction with 🐲the upp💫er Rear Wing assembly, leads to an efficient reduction of Downforce and Drag.

Aston Martin

Front Corner - Performance, Flow Conditioning. Revised scoop shape with inlet and exit changes. Also incorporates modified stays to the rear deflector. The geometry modifies the flow a🍰round the tyre and improves the wake shape to reduce the effect on the parts of the car downstream. 

Rear Wing - Circuit specific, Drag Range. Less aggressive rear wing cascade, with 💫two different flap options. Part of standard development to provide a wing with less load and hence drag to suit the characteristics of this circuit.

Williams

Beam Wing - Circuit specific, Drag Range. A trim to the trailing edge of the wing to re꧙duce the chord length. The reduction in 🌸size of the beam wing simply reduces the downforce and drag of the rear wing assembly to deliver a drag level appropriate for the Jeddah circuit. 

Front Corner - Circuit specific, Cooling Range. A smaller exit for the front brake duct is available. This reduces the exit area relative to the version used in Bahrain. The smaller duct exit limits theꦡ cooling flow rate through the front br🍬ake system. This adjusts the brake temperatures into a range that suits the Jeddah circuit.

RB

Coke/Engine - Cover Performance - Flow Conditioning Compared to Race 01, the shape & slope of the top deck of the bodywork has been modified. Flow quality passing o𓆉ver t𝓀he bodywork is improved before it passes to the rear of the car. 

Cooling Louvres - Circuit spe💙cific, Cooling Range Compared to Race 01, cooling louvres are created on the top-deck of the bodywork to increase cಌooling range. Optional. Increase airflow through the radiators. 

Front Wing - Circuit specific, Balance Range Flap chord trim t🧔o tune balance range for lower rear wing levels. Opt൩ional. Front wing load is reduced by reducing the loaded area of the flap. 

Rear Wing - Circuit🔥 specific, Drag Range Reduced camber and incidence rear wing to adjust drag level. Optional. Rear wing load and🐼 drag is reduced by aerodynamically unloading the upper rear wing elements.